Seat Mii 2019 Owner's Manual page 85

Table of Contents

Advertisement

›››
5.
Unscrew the wing nut
Fig. 89
5
Remove the tail light from the bodywork by
6.
carefully pulling backwards.
Disassemble the tail light unit and place it on a
7.
flat, clean surface.
To change the bulb
Unlock the bulb holder locking tab (arrow)
›››
8.
Fig. 90
C and remove the bulb holder from
the tail light.
Replace the faulty bulb by a new identical bulb
9.
›››
Fig. 90
D.
Place the bulb holder in the tail light unit. The
10.
attachment tabs (arrow) should audibly click
›››
into place
Fig. 90
C.
Assembling the rear light units
Carefully insert the tail light unit into the open-
11.
ing in the bodywork.
Support the tail light with one hand in the as-
12.
sembly position and securely screw the wing
›››
nut with the other
Fig. 89
5
Ensure that the tail light unit has been correctly
13.
fitted and is firmly secured.
Insert the connector
into the bulb holder
2
14.
and press the lock
on the connector in the
3
opposite direction to the arrow
Insert the cover. The cover should lock into
15.
place.
Fuses and bulbs
B.
16.
Close the rear lid
Changing the number plate light
In the rear bumper: remove the plate
Fig. 91
light.
B.
Number plate light: detach the bulb
Fig. 92
›››
Fig. 89
B.
holder.
›››
page
99.
Complete operations only in the se-
quence given:
1.
2.
3.
4.
5.
6.
7.
With one hand, press on the number plate light
from left to right and remove it from the bumper
›››
Fig.
91.
Detach the number plate light carefully from
the bumper.
Turn the bulb holder with the bulb anticlock-
wise and remove it in the direction of the arrow
›››
Fig.
92.
Replace the faulty bulb with a new identical
bulb.
Place the bulb holder in the number plate light
and press in the opposite direction to the arrow
›››
as far as possible
Fig.
92.
Insert the number plate light carefully into the
left edge of the opening on the bumper. During
this process, check that the assembly direction
of the number plate light is correct, i.e. the
spring must be on the right.
Insert the number plate light into the bumper
until it audibly clicks into place.
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents