Technical Data; Technical Features; Important Information - Seat Mii 2019 Owner's Manual

Technical data

Technical features

Important information

Introduction
The information in the vehicle documentation
always takes precedence over the informa-
tion in this Instruction Manual.
All technical specifications provided in this
documentation are valid for the standard
model in Spain.
The figures may be different depending
whether additional equipment is fitted, for dif-
ferent models, for special vehicles and for
other countries.
Technical features
Abbreviations used in the Technical Speci-
fications section
kW Kilowatt, engine power measurement.
Pferdestärke (horsepower), formerly
PS
used to denote engine power.
rpm, 1/min Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
Cetane number, indication of the die-
CZ
sel combustion power.
Research octane number, indication of
RON
the knock resistance of petrol.
Vehicle identification data
Vehicle identification number.
Fig. 193
Vehicle identification number
The vehicle identification number (chassis
number) can be read from outside the vehicle
through a viewer in the windscreen
›››
Fig. 193. This viewer is located in the lower
part of the windscreen. The vehicle identifica-
tion number (chassis number) is also stam-
ped on the right water drain channel. The wa-
ter drain channel is located between the sus-
pension tower and the wing. Open the bonnet
to read the vehicle identification number
Specific vehicle weight information
The instructions in the official vehicle docu-
ments take precedence. All the technical da-
ta provided in this documentation is applica-
ble to the basic model.
The figures may be different depending
whether additional equipment is fitted, for dif-
ferent models and for special vehicles.
Kerb weight values shown in the following ta-
ble apply to a vehicle with driver (75 kg), liq-
uids including a fuel tank 90% full, in addition
›››
to tools and a spare wheel
weight indicated increases with optional
equipment and retrofitting of accessories,
while proportionally reducing carrying ca-
pacity.
The load is equivalent to the following
weights:
Passengers.
●
Total equipment.
●
.

. The kerb
»
233