Seat Mii 2019 Owner's Manual page 113

The driver should always adjust the rear vi-
sion mirror to permit adequate visibility
through the rear window.
Manual anti-dazzle function for interior
rear vision mirror
Basic position: point the lever at the bottom
●
of the mirror forwards.
Pull the lever to the back to select the anti-
●
›››
dazzle function Fig. 117.
Exterior mirrors
On the front doors: button to adjust
Fig. 118
the mechanical exterior rear vision mirror
Lights and visibility
On the driver door: rotating control for
Fig. 119
electric windows.
Read the additional information carefully
›››
 page 15
Adjust the exterior mirrors by pressing the ad-
›››
just button Fig. 118 or the rotary control*
›››
Fig. 119.
Folding in the exterior mirrors and returning
them to their original position is possible
through a mechanical system. Carefully fold
the exterior rear vision mirror casing towards
the side window or pull it away from the win-
dow until it clicks into place.
WARNING
Fold and unfold the exterior mirror, taking
care to avoid injuries.
Only fold or unfold the exterior mirror
●
when there is no-one in the way of the mir-
ror.
When moving the mirror, take care not to
●
trap fingers between the mirror and the
mirror bracket.
WARNING
Failure to correctly estimate the distance
of the vehicle behind could lead to serious
accident.
Rear-view convex or aspheric mirrors in-
●
crease the field of vision, however objects
appear smaller and further away in the mir-
rors.
The use of these mirrors to estimate the
●
distance to the next vehicle when changing
lane is imprecise and could result in serious
accident.
If possible, use the rear vision mirror to
●
estimate distances to vehicles behind you
or in other circumstances.
Make sure that the rear visibility is ade-
●
quate.
For the sake of the environment
The exterior mirror heating should be
switched off when it is no longer needed.
Otherwise, it is an unnecessary fuel waste.
Note
In the event of a fault, the electric exterior
mirrors can be adjusted manually by press-
ing the edge of the mirror surface.
111