Seat Mii 2019 Owner's Manual page 178

 Flashes
Slow: City Safety Assist function currently not availa-
ble.
If the vehicle stops, turn the engine off and on again.
If necessary, inspect the laser sensor (dirt, frost)
›››
in Laser sensor on page
function, refer to a Specialised workshop to have the
system inspected.
 
Flashes
Within the 5-30 km/h (3-19 mph) operating range:
the city safety assist has been switched off with the
›››
button Fig. 171.
 
Switch the city safety assist function on with button
›››
Fig. 171.
 
Several warning and control lamps should
light up for a few seconds when the ignition is
switched on, signalling that the function is be-
ing verified. They will switch off after a few
seconds.
WARNING
If the warning lamps are ignored, the vehi-
cle may stall in traffic, or may cause acci-
dents and severe injuries.
Never ignore the warning lamps.
●
Stop the vehicle safely as soon as possi-
●
ble.
176
CAUTION
Failure to heed the warning lamps when
they appear may result in faults in the vehi-
cle.
176. If it still does not
Laser sensor
Fig. 169
the City Safety Assist function.
Fig. 170
Driving
On the windscreen: laser sensor for
Laser sensor detection area.
A laser sensor on the windscreen
allows the system to detect driving situations
in front of the vehicle.
Vehicles ahead can be detected up to a dis-
tance of about 10 m.
WARNING
The laser beam on the sensor can produce
serious injuries to the eyes.
Never focus optical devices, e.g. a cam-
●
era, a microscope or a magnifying glass
closer than 100 mm from the laser sensor.
Note that the laser beam can stay active
●
when the City Safety Assist system is
switched off or unavailable. The laser
beam is not visible to the human eye.
CAUTION
If the windscreen is dirty or frosted in the
area of the laser sensor, e.g. due to rain,
mist or snow, the City Safety Assist system
may fail to operate as a result.
Always keep the laser sensor area free of
●
dirt and ice.
Use a small brush to remove snow and a
●
de-icer spray to remove ice.
CAUTION
A damaged windscreen in the laser sensor
area may cause the City Safety Assist
function to stop working.
›››
Fig. 169