Seat Mii 2019 Owner's Manual page 179

Replace the windscreen if it is scratched,
●
cracked or chipped by stones in the laser
sensor area. Only use a windscreen author-
ised by SEAT. Carrying out repairs is not
permitted (e.g. in the case of damage suf-
fered in an impact from a stone).
When replacing the windscreen wipers,
●
only use windscreen wipers authorised by
SEAT.
Do not paint the laser sensor area on the
●
windscreen or cover it with adhesives or
other materials.
Function
In the lower part of the centre console:
Fig. 171
button for the city safety assist function.
Switching on and off the City Safety Assist
function
›››
Press the Fig. 171 button on the centre
●
console.
Driver assistance systems
When the City Safety Assist function is
switched on, the control lamp
 
on the dash panel within the operational
range, i.e. for speeds between 5-30 km/h
(3-19 mph).
Switch off the City Safety Assist function in
the following situations
Switching off the City Safety Assist function is
recommended in the following situations
›››
:
While the vehicle is being towed.
●
If the vehicle has been taken to an auto-
●
matic car wash.
If the vehicle is above a test bed.
●
If the laser sensor is faulty.
●
After the laser sensor has been involved in a
●
collision.
When driving off road (overhanging
●
branches).
If objects are protruding above the bonnet,
●
e.g. a load carried on the roof that significant-
ly protrudes over the front.
If the windscreen is damaged in the laser
●
sensor area.
WARNING
Failure to switch off the City Safety Assist
function in the above situations may result
in accidents and serious injury.
Switch off the City Safety Assist function
●
lights up
in critical situations.
177