Seat Mii 2019 Owner's Manual page 128

Extending the luggage compartment for-
ward
Disassemble the luggage compartment
●
›››
tray page 124.
Disassemble the rear headrests
●
›››
page 49.
Fold the backrest of the rear seat forward
●
›››
page 123.
If necessary, expand the boot downward.
●
CAUTION
Do not let the luggage compartment floor
fall when closing it. Always carefully guide
it downward in a controlled manner. Other-
wise, the lining and the floor of the boot
could be damaged.
Class N1 (commercial) vehicles
For safe vehicle operation, the electrical sys-
tem must work perfectly. Special attention
should be paid so it is not damaged during
adjustment, loading and unloading of trans-
ported objects.
Fastening rings*
In the front part of the luggage compartment,
there may be fastening rings to secure the
luggage.
126
Operation
In order to use the fastening rings, they must
be lifted beforehand.
WARNING
If unsuitable or damaged belts or retaining
straps are used, they may break in the
event of braking or an accident. Objects
could then be launched across the passen-
ger compartment and cause serious or fa-
tal injuries.
It is important to always use belts or re-
●
taining straps that are suitable and in a
good condition.
Belts and retaining straps should be se-
●
curely fastened to the fastening rings.
Objects in the luggage compartment
●
that are unsecured could move suddenly
and modify the handling of the vehicle.
Small light objects should also be fixed in
●
place.
A child seat should never be secured with
●
the fastening rings.
Note
The maximum tensile load that the fas-
●
tening rings can support is 3.5 kN.
Belts and securing systems for the ap-
●
propriate load can be obtained from speci-
alised dealerships. SEAT recommends visit-
ing a SEAT dealership for this.
Retaining hooks
In the boot: retaining hooks.
Fig. 139
There may be hooks in the upper left and
right part of the luggage compartment.
WARNING
Never use these hooks to secure objects. In
case of sudden braking or an accident,
they could rupture.
CAUTION
The hooks can support a maximum of 2.5 kg
each.