›››
in Introduction on page 99
›››
page 99
›››
page 12
Manual release mechanism for the
rear lid
From the trunk: emergency unlocking of
Fig. 8
the rear lid.
If necessary, fold the rear seat bench back-
●
›››
rest forward
page
14.
Remove equipment to access the inside of
●
the rear lid.
›››
Unfold the key shaft
●
12
Insert the key shaft into the rear lid opening
●
›››
Fig. 8
and press the release lever in the di-
rection of the arrow to unlock the rear lid.
Bonnet
page
92.
A: Release lever in the footwell on the
Fig. 9
driver side B: Release lever on the bonnet
The essentials
C: Bonnet securing rod in the bonnet.
Fig. 10
D: Bonnet supported by the bonnet securing
rod
Opening the bonnet
The bonnet is released from inside the vehi-
cle.
Before opening the bonnet, make sure that
the windscreen wiper arms are in place