Choosing stored stations
Radio mode notification: change of
Fig. 151
station using the arrow buttons.
Saved stations.
Fig. 152
Select the frequency band on which the
●
station is saved.
Press the function button,
.
●
Press the preset button in which the station
●
is saved briefly.
Depending on the settings, you can cycle
through the stations of a frequency band with
the arrow buttons
and
( Arrow but-
).
tons:
Audio Mode
The stored stations can only be played if they
can be received at the current location.
Media Mode
Introduction
"Media sources" are audio sources contain-
ing audio files on various different data stor-
age devices (e.g. CD, external MP3 players).
These audio files can be played with their
corresponding applications or the radio's au-
dio inputs.
Note
Do not use memory card adapters.
●
SEAT assumes no liability for any deterio-
●
ration or loss of files on data storage devi-
ces.
Select a Media source
Select a Media source
Fig. 153
Press the
equipment button to switch to
the Media mode.
When switching to the Media mode, the bot-
tom of the screen shows the available Media
sources for a few seconds. The Media source
that is currently playing is highlighted.
Open the Media selection menu manually
and select a Media source
In the Media mode, press the
●
ment button to display the Media selection
menu again.
Enable the Media source you want by
●
pressing the corresponding function button.
OR: Press the
equipment button again
●
to cycle through the available Media sources.
equip-
»
141