Seat Mii 2019 Owner's Manual page 21

Mounting systems
Always secure child seats properly and safe-
ly in the vehicle according to the child seat
manufacturer's installation instructions.
Mounted child seats must rest correctly on
the vehicle's seat and must not move or rock
more than 2.5 cm.
Child seats equipped for a Top Tether strap
must also be secured using the Top Tether re-
›››
taining strap in the vehicle page
tach the retaining strap to the corresponding
retaining rings only. Not all rings can be used
with the Top Tether system. Always tighten
the Top Tether retaining strap so that the child
seat fits snugly against the corresponding
seat in the vehicle.
The essentials
Specific mounting systems for each coun-
try
Attachment variants
Europe: ISOFIX retaining rings and upper
A
retaining strap
›››
page 21.
Three-point seat belt and upper retaining
B
›››
strap page
21. At-
The systems include the child restraint
system mounting with an upper retaining
strap (Top Tether) and lower anchoring
points on the seat.
Fig. 26
dren seats.
›››
Fig. 26:
›››
page 20 and
19.
On rear seats: possible assemblies of chil-
Securing child seats with the seat
belt
The seat belt may be used to secure child
seats with the universal marking (on the or-
ange label) to the vehicle seats marked with
a u in the table below.
Front pas-
Category
senger a)
Group 0
u
Up to 10 kg
Category 0+
u
Up to 13 kg
Group 1
u
9 to 18 kg
Rear seats
u
u
»
u
19