Seat Mii 2019 Owner's Manual page 27

Table of Contents

Advertisement

Do not consult the messages on the in-
strument panel screen when driving.
Management of indications on the
display
Fig. 34
Windscreen wipers lever: control but-
tons.
Calling up options
Switch the ignition on.
If a message or vehicle symbol is displayed,
›››
press
(
Fig. 34
).
OK/RESET
A
Press the top or bottom part of the rocker
›››
switch
Fig. 34
until the desired option
B
appears.
The essentials
Multifunction display (MFI)
The multifunction display (MFD) has two au-
tomatic memories: 1 - Partial memory and 2
- Total memory. The selected memory will
be shown in the lower right-hand corner of
the display.
With the ignition switched on, and memo-
ry 1 or 2 displayed, briefly press
change from one memory to another.
The memory stores the values for the
journey and the consumption from the
moment the ignition is switched on un-
til it is switched off again.
If the journey is broken for more than 2
Trip memo-
hours, the memory is automatically
ry (for a sin-
erased. If the journey is continued in
gle jour-
less than 2 hours after the ignition is
ney).
switched off, the new data is added to
the data already stored in the memo-
ry.
The memory stores the values of any
number of journeys, until it counts a
total of 19 hours and 59 minutes of
driving, or 1999.9 km or miles of driv-
Total mem-
ing, depending on the type of instru-
ory (for all
ment panel fitted. On reaching either
journeys).
of these limits, the memory is auto-
matically erased and starts to count
from 0 again.
Possible displays
Menu
Function
Current time in hours (h) and mi-
Time
nutes (min).
This indicates the hours (h) and mi-
Travelling
nutes (min) since the ignition was
time
switched on.
The current fuel consumption dis-
to
OK
play operates throughout the jour-
Current
ney, in l/100 km; with the engine
fuel con-
running and the vehicle stopped, in
sumption
l/hour.
After turning on the ignition, aver-
age fuel consumption in li-
tres/100 km will be displayed after
Average
travelling about 100 metres. Oth-
fuel con-
erwise horizontal lines are dis-
sumption
played. The value shown is upda-
ted approximately every 5 sec-
onds.
Approximate distance in km that
can still be travelled with the fuel
remaining in the tank, assuming
Operating
the same style of driving is main-
range
tained. This is calculated using the
current fuel consumption.
Distance travelled, after ignition is
Distance
switched on, in km.
covered
»
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents