HEIDENHAIN TNC 426 PB/M Technical Manual page 1080

Table of Contents

Advertisement

December 2001
Soft key
Option
Define the names and addresses of the network printers. You
can print directly from the TNC on the printers defined here.
ADDRESS
DEVICE
NAME
PRINTER
NAME
Any errors occurring during network operation are displayed.
If a ping is sent, the receiver sends it back to the sender. Thus
a ping can be used to check whether a connection to a particular
remote station is possible. The address is entered as four
decimal numbers separated by points (dotted-decimal
notation).
After the ping has been sent, one of the following messages
appears:
HOST RESPOND: Data package was received again
TIMEOUT: Data package was not sent back within a certain
period of time
CAN NOT ROUTE: TNC could not send data package to the
receiver
Ethernet Interface (Option)
Meaning
Internet address of printer: Enter as four decimal
numbers separated by points (dotted-decimal
notation). Your network supervisor can give you
the internet address.
TNC device name: The device name entered
here is displayed on the TNC after the print soft
key has been activated.
Printer name: Name of the printer for the printer
server.
8 – 47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tnc 430 pa/mTnc 430 mTnc 426 cbTnc 430 caTnc 426 pbTnc 430 pa ... Show all

Table of Contents