Table of Contents
Advertisement
Example
December 2001
The printer NEC P7 PLUS is to be configured with operating mode EXT1.
The parameters listed are preset by the printer (see the operating manual of
the printer concerned):
n
Serial interface
n
8 data bits
n
Even character parity
n
XON/XOFF protocol (software handshake)
n
9600 bps
The following settings are made at the TNC:
7 7 7 7
Select MP5000 = 0.
7 7 7 7
Select MP5020.0 = %10101001.
7 7 7 7
Select MP5030.0 = 0.
Machine parameter
MP5000 = 0
MP5020.0 = %10101001
MP5030.0 = 0
7 7 7 7
Call the MOD functions.
7 7 7 7
Press the RS-232-C RS422 SETUP soft key.
7 7 7 7
Choose the EXT1 operating mode.
7 7 7 7
Set the baud rate for EXT1 to 9600 bps.
Configuration of Interfaces
Effect
No interface inhibited
Bit 0: 8 data bits
Bit 1: any BCC character
Bit 2: transmission stop by RTS not active
Bit 3: transmission stop by DC3 active
Bit 4: character parity even
Bit 5: character parity desired
Bit 6/7: 1 stop bit
Standard data transfer
8 – 19
Advertisement
Table of Contents
