Table of Contents
Advertisement
ABB i-bus
EIB / KNX
®
1
General
1.1
Product and
functional overview
2
General
The analog actuator converts measuring data received via EIB / KNX
telegrams into analog output signals. The analog output signals enable
heating, ventilation and air conditioning units to adapt their output values
to information received from the bus and thus to take part in control
processes.
Voltage signals:
Current signals:
The Analogue Actuator features four analogue outputs which can be
parameterised to a previously set format. Outputs which are not required
can be switched off. The output signals can be forced controlled.
The number of analogue outputs can be increased to 8 using the Analogue
Actuator Module AAM/S. When combined with the "Dimming" switch sensor
function the Analogue Actuator and the Analogue Actuator Module can be
used as an active control unit for dimming applications.
Note:
The Analogue Actuator AA/S requires an external 24 V AC
voltage supply for operation. This voltage supply can also
simultaneously assume the supply of power to a connected
Analogue Actuator Module AAM/S.
0 ... 1 V DC
0 ... 10 V DC
0 ... 20 mA
4 ... 20 mA
Advertisement
Table of Contents
