ABB i-bus
EIB / KNX
®
4.3.2
Communication objects
AAM/S 4.1, Output 5 – 8
Commissioning
The communication objects 29–57 of the Extension module AAM/S 4.1
are only visible if the parameter "Extension module existing" is set to "Yes".
Fig. 11: Communication objects Analogue Actuator Module AAM/S 4.1
No.
Function
29-32 Extension module
1-byte or 2-byte objects with which the value of the output can be set. In 1-byte mode a new
input value can be assumed rapidly or it is possible to dim to the value. The input object can
be time monitored.
(see also object "Alarm Output ...")
33-36 Extension module
1-byte object or 2-byte object for displaying current output value.
Object name
Data type
Input value output 5...8
1 Byte EIS 6
DPT 5.001
2 Byte EIS 5
DPT 9.0xx
Status
1 Byte EIS 6
Output 5...8
DPT 5.001
2 Byte EIS 5
DPT 9.0xx
Flags
C, W
C, R, T
17