Efinition Of The Hardware -Interrupts And Of The I/O-Address - Kontron DIMM-PC/MD Product Manual

DIMM-PC/MD Product Manual
6.2 Definition of the Hardware-Interrupts and of the I/O-Address
The definition of the Hardware-Interrupts and the I/O addresses is performed by means of
the DIP-switches located in the middle of the card ( see the picture below).
The relevant switch positions for the possible I/O Addresses and Hardware-Interrupts are
described in detail in the following table.
S1 S2 S3
OFF OFF OFF
OFF OFF
ON
OFF OFF
ON
OFF
ON ON
OFF OFF
ON
OFF
ON ON
OFF
ON ON
ON ON ON
X X X
NOTE:
The IRQ and I/O Address of the card should not be used by any other computer
peripheral equipment. If necessary, you should define your own address and IRQ.
Kontron® Embedded Modules GmbH
S4 Address S1
OFF 2E0
ON
OFF 2E8 OFF
OFF 2F0 OFF
OFF 2F8 OFF
OFF 3E0 OFF
OFF OFF
3E8
(default)
OFF 3F0 OFF
OFF 3F8 OFF
OFF
ON IRQ 5
(default)
S2 S3 S4 S2
OFF OFF OFF OFF
OFF OFF OFF
ON
OFF OFF OFF
ON
OFF OFF OFF
ON
OFF OFF OFF
ON
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
15
Hardware-Installation
S5 S6 S7 S8
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF
ON
OFF OFF OFF
ON
OFF OFF OFF
ON
OFF OFF OFF OFF
Revision 1.0
Interrupt
IRQ 3
IRQ 4
IRQ 7
IRQ 9
IRQ 10
IRQ 11
IRQ 12
IRQ 15
IRQ 5