Load Capacity Charts - Xtreme XRM1145 Operation And Safety Manual

Operation
A
WAR
Load Capacity Charts
The reach forklift includes a frame
~
sway override switch. Improper use
L/
of the frame sway override switch can
~
cause property damage, injury, or
death.
The frame sway feature becomes locked and will not
operate when the boom is raised 40° or more.
Pressing the frame sway override switch (the red
button on the attachment tilt and frame sway control
joystick OR the optional foot switch) will override the
lockout feature and allow frame sway.
Figure 7-41. Frame Sway Override Switch.
Figure 7-42. OPTIONAL Frame Sway Override Foot Switch.
Xtreme Manufacturing
64
~
DO NOT exceed rated capacities. Any
attempt to lift or carry loads in excess
L /
of those shown on the load capacity
~
charts may cause vehicle tip over,
loss of load, or structural damage
which could result in injury or death.
All load ratings shown on load capacity charts
are based on the vehicle being on firm, level
ground, the forks being evenly positioned on the
carriage, the load being centered on the forks,
properly sized tires properly inflated, and the
vehicle being in good operating condition.
Load capacity charts, located on the left side of the
dash panel, are provided to assist the operator in
determining how to safely operate the boom to pick
up, carry, and set down a load with the reach forklift,
including what angle, how high, and how far to
extend the boom.
"H-+f-l-
-H-+-+-:;I7ll
•
•
•
XRM·124
Figure 7-43. Typical Load Capacity Chart.
800-497-1704