Rear View Mirrors - Xtreme XRM1145 Operation And Safety Manual

Operator Cab
Rear View Mirrors
• DO NOT adjust the seat or seat belt
~
while the vehicle is moving. Keep
both hands on the wheel while the
vehicle is moving to prevent loss of
vehicle control which could result in
injury or death.
Three (3) adjustable rear view mirrors are provided
to aid the operator's rear vision. Two (2) rectangular
mirrors are mounted on the upper left and right of the
operator's cab.
One (1) rear view mirror is mounted on the frame.
Figure 6-15. Adjust Rear View Mirrors On Cab.
Figure 6-16. Adjust Rear View Mirror On Frame.
2
Optional
Safety Belt
3 Inch Width
Standard
Safety Belt
2 Inch Width
Before starting the engine. adjust the seat for posi-
tion and comfort (refer to the Operator Seat section
of this manual) and then adjust the seat belt as fol-
lows:
1. Grasp the free end of the seat belt (located on the
left side of the seat) and make sure the belt web-
bing is not twisted or entangled in any portion of
the seat assembly.
2. Pull the retractable seat belt across your lap.
Position the seat belt as Iowan your body as pos-
sible.
3. Insert the latch plate into the buckle (on the right
side of the seat) until a "click" is heard.
4. Make sure seat belt retracts snugly across your
lap.
NOTE: Depress the red push button on the buckle
to release the two inch (2") seat belt. Pull the clasp
on the buckle to release the three inch (3") seat belt.
Figure 6-14. Seat Belt.
1. Push Button Release. 2. Pull Clasp Release.
Xtreme Manufacturing
31 800-497-1704