Before Starting Vehicle - Xtreme XRM1145 Operation And Safety Manual

Safety
INSPEcnQN
..--
"'--
"'--
"'--
"'--
"'--
"'--
'"
Perform a pre-operation inspection
and functional tests at the beginning
of each work shift. Perform the
pre-operation inspection first.
DO NOT perform the pre-operation
inspection with the engine running or hot.
Contact with moving or heated parts can cause
injury or death.
"""' C OON
Perform the pre-operation inspection
~ and functional tests in an open area.
&:
Inspections and functional tests may
" ' - - require assistance. Keep the ass is-
:;--
tant visible and a safe distance from
the vehicle to prevent injury or death.
Become familiar with all safety and
hazard decals, regulations, and pro-
cedures. Make sure all proper safety
and hazard decals are attached to the
~=!.=.!Jvehicle
and remain legible.
A
A brief description of controls, indica-
tors, and instruments is provided as a
convenience for the operator. These
descriptions DO NOT provide com-
plete operation instructions. Read
and understand the entire manual to prevent
equipment damage, injury, or death.
~
" K e e p fingers and feet away
' \ \
from moving parts or pinch
~
points to prevent pinching
~, or crushing. DO NOT allow
anyone between the tires
and the vehicle frame while operating the vehi-
cle.
a
WAR
• Always check the condition of the
~ seat belt and mounting hardware
before operating the vehicle. If the
seat belt or mounting hardware is
defective, it may not properly restrain
the operator, resulting in injury or death.
• DO NOT operate the vehicle until the seat belt
or mounting hardware is replaced, if worn or
damaged.
• The seat belt MUST be worn while operating
the vehicle. Failure to wear the seat belt could
result in injury or death.
a
WARM
Keep the Operator Manual on the
A
vehicle at all times. Contact Xtreme
Manufacturing for any replacement
manuals.
Before Starting Vehicle
O
Wear appropriate protective clothing.
Personal protective equipment can
include, but is not limited to hardhat,
gloves, footwear, safety glasses or
goggles, and hearing protection.
Make sure clothing is snug and properly belted.
DO NOT wear loose clothing, jewelry, watches,
or anything that can catch on vehicle controls,
moving parts, etc.
~
Consult Material Safety
Data Sheets (MSDS) for
chemical hazards and first
aid instructions. MSDS
should be available from
the manufacturer or supplier of the fluid.
A
Clearly define responsibilities and
procedures for operating the vehicle
and all attachments. DO NOT proceed
until you seek expert assistance from
a qualified person if any doubt or
question arises about the correct or safe meth-
ods for operating the vehicle.
1111
To avoid injury or death,
~
:::::: ::::: carefully read and under-
- stand all instructions
before operating the vehi-
cle. DO NOT operate, mod-
ify, repair, or maintain the vehicle unless you
read and understand the instructions and warn-
ings in this and all other applicable manuals and
technical publications. Follow all State and
Federal health and safety laws and/or local regu-
lations.
Xtreme Manufacturing
9 800-497-1704