Height Adjustment Knob; Fore And Aft Adjustment Lever; Backrest Angle Adjustment Lever; Seat Belt - Xtreme XRM1145 Operation And Safety Manual

Operator Cab
Height Adjustment Knob
The seat controls include a three-step height adjust-
ment knob. Rotate the height adjustment knob
clockwise to raise the seat and counterclockwise to
lower the seat.
NOTE: A height adjustment indicator shows which
height step the seat is adjusted to.
Figure 6-10. Height Adjustment Knob And Indicator.
Fore and Aft Adjustment Lever
Pull the fore and aft adjustment lever outward from
the seat to release the seat lock. Slide the seat for-
ward or backward to a comfortable location and
release the lever to lock the seat in the desired posi-
tion.
I
XRM-20
I
Figure 6-11. Fore And Aft Adjustment Lever.
Xtreme Manufacturing
30
Backrest Angle Adjustment Lever
Pull the backrest angle adjustment lever up to
release the seat backrest lock. Adjust the angel of
the backrest and release the lever to lock the back-
rest to the desired angle.
Figure 6-12. Backrest Angle Adjustment Lever.
Seat Belt
• Always check the condition of the
~
seat belt and mounting hardware
before operating the vehicle. If the
seat belt or mounting hardware is
defective, it may not properly restrain
the operator, resulting in injury or death.
• DO NOT operate the vehicle until the seat belt
or mounting hardware is replaced, if worn or
damaged.
• The seat belt MUST be worn while operating
the vehicle. Failure to wear the seat belt could
result in injUry or death.
The reach forklift is equipped with a standard two
inch (2") wide retractable seat belt. A three inch (3")
wide retractable seat belt is optional, except when
required by federal, state, and local laws and regula-
tions.
(;7
"
L
~
. < .
.
} .
, '!b,' '-
I"J . • .
-, , '. '·'1 . . '
~_
J • •
-.J!'i "
..........-
.~b."
~7'"
/
\~,
.'
.
I .
/~
'--,
-'
-
.
lliQP
~ <.~.,
Figure 6-13. Retractable Seat Belt.
800-497-1704