Pre-Operation Inspection Checklist - Xtreme XRM1145 Operation And Safety Manual

Operation
c
Pre-Operation Inspection Checklist
Walk around the ENTIRE vehicle while visually performing the pre-operation inspection.
D
D
D
D
D
D
Check forks for welds, cracks, misalignment. or any other damage.
Check that carriage assembly crossbar is straight and in place to prevent forks from changing position or
coming off the carriage.
Check all hydraulic hoses and hose connections for wear or leaks. Use a piece of cardboard.
Check tilt cylinder for leaks or any other damage.
Check boom for straightness or any other damage.
Check all four (4) tires, rims, and wheels for:
D
Punctures, cracks, cuts, gouges, bulges, foreign objects, or any other damage to tires.
D
Proper ballast.
D
Loose or missing lug nuts.
D
Bent flanges or any other damage to rims.
D
Check frame sway cylinder and hoses for leaks or any other damage.
D
Check mirrors for cracks, cleanliness, and proper adjustment.
D
Check hydraulic sight gauge for proper fluid level. Add hydraulic fluid, if necessary.
D
Check engine compartment for:
D
Damaged belts, hoses, and radiator blades.
D
Coolant reservoir level. Add radiator coolant, if necessary.
D
Engine oli level. Add engine oil, if necessary.
D
Electrical wires and connectors.
Check front and rear axle for leaks or any other damage.
Check main boom cylinders and hydraulic lines for leaks or any other damage.
Check battery terminals for corrosion.
Check battery for cracked, melted, or damaged case.
Check rear sway cylinder and hydraulic lines for leaks or any other damage.
Check electrical connections on rear sway cylinder.
Check that all labels and stickers are legible. Replace any damaged or illegible stickers.
Check that operator's cab is empty of all trash, debris, or any loose items.
Check that personal belongings are secured in the personal storage box.
Check that steps, pedals, and non-skid surfaces are clean and free of grease, oli, dirt, snow, or ice.
Check hourmeter to determine if the vehicle needs periodic maintenance.
Check that "Do Not Operate" tags have not been placed on the vehicle.
Check that load capacity charts are legible.
Check that frame level indicator is working properly.
Check condition and operation of the seat belt and mounting hardware.
Check that Operator Manual is in the protective case and legible.
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Date: _
D
Initials:
Xtreme Manufacturing
44
800-497-1704