Controls And Indicators; Travel Select Lever; Gear Select Switch; Parking Brake Switch - Xtreme XRM1145 Operation And Safety Manual

Operator Cab
Comtr:ols and Indicators
Travel Select Lever
The travel select lever has three (3) positions: FOR-
WARD, NEUTRAL, and REVERSE, which change
the direction of travel.
Table 6.
Travel Select Lever
Position
Location
F
Forward
Up Position (Away from the operator).
N Neutral Center Position.
R Reverse
Down Position (Toward the operator).
Figure 6-17. Travel Select Lever.
The travel select lever automatically locks when it is
in the NEUTRAL position. The operator must raise
and move the travel select lever when changing to
the FORWARD or REVERSE position.
NOTE: The travel select lever must be in the NEU-
TRAL position to start the reach forklift.
NOTE: The back-Up alarm automatically sounds
when the travel select lever is in the REVERSE posi-
tion.
Xtreme Manufacturing
32
Gear Select Switch
The gear select switch has a twist grip handle with
four (4) positions: 1 - FIRST, 2 - SECOND,
3 - THIRD, and 4 - FOURTH.
NOTE: The reach forklift can be operated in four (4)
forward and four (4) reverse gears.
Figure 6-18, Gear Select Switch.
Parking Brake Switch
The parking brake switch (A) has two (2) positions:
ON and OFF.
I
XRM.D41
Figure 6-19, Parking Brake.
(A) Parking Brake Switch, (B) Parking Brake Indicator,
Set parking brake switch (A) to ON (down) to engage
the parking brake and to OFF (up) to disengage the
parking brake.
The parking brake indicator (8) illuminates when the
parking brake is set to ON (engaged).
800-497-1704