Load Shift; Frame Leveling - Xtreme XRM1145 Operation And Safety Manual

Load Shift
1. If the load shifts, stop the vehicle immediately.
2. Lower and adjust the load to center its weight.
3. If the load shift is too great for adjustment,
rearrange the load before attempting to move the
vehicle.
Frame Leveling
ADANGER
~ Use of the frame sway control with the
boom raised above horizontal can
L/
cause tip over resulting in death or
~
injury. Always use the frame sway
control to level the vehicle BEFORE
raising the boom above horizontal. If the vehicle
cannot be leveled using the frame sway control,
do not attempt to raise or place load. Reposition
vehicle or have surface leveled.
The attachment tilt and frame sway control joystick
has variable motions from the center that control the
frame sway (right and left) functions.
Table
11.
Frame Sway Functions
Function Joystick Action
FRAME SWAY RIGHT Move joystick right.
FRAME SWAY LEFT Move joystick
le~.
Figure 7-38. Attachment Tilt And Frame Sway Conlrol
Joystick.
Xtreme Manufacturing
63
Operation
An OPTIONAL frame sway control joystick also con-
trols the frame sway (right and left) functions.
........
,-.-,
Figure 7-39. OPTIONAL Frame Sway Control Joystick.
To lock the frame sway, place the travel select lever
in NEUTRAL and apply the service or parking brake.
NOTE: Maximum frame sway is 22· overall or 11·
each direction, left and right.
A frame level indicator is mounted on the inside top
center of the operator's cab. The frame level indica-
tor allows the operator to view if the vehicle has been
positioned in a level condition. Always frame sway
the vehicle right or left until the indicator shows
a·
(level).
Figure 7-40. Frame Level Indicator.
800-497-1704