Before Starting Vehicle - Xtreme XRM1145 Operation And Safety Manual

I
XRM-041
Operation
Before Starting Vehic_le_
14
Failure to use proper safety proce-
dures when mounting and dismount-
ing the vehicle could result in injury
or death.
• Keep steps clear of dirt, mud, snow, ice,
debris, and other hazards.
• Face the vehicle for mounting or dismounting.
Use handholds and steps to maintain three (3)
points of contact at all times, either both
hands and one foot OR both feet and one
hand.
• DO NOT use the controls, steering Wheel, or
foot pedals as handholds or steps. Avoid
accidentally engaging or disengaging a con-
trol.
~ DO NOT jump from the vehicle.
• Clothing can get caught on pedals,
levers, or other protruding parts.
Landing on uneven surfaces can
result in serious personal injury.
1. Use safe mounting/dismounting procedures to
enter the operator cab.
2. Adjust the operator seat for position and comfort.
(Refer to Seat Adjustment section in this manual.)
3. Fasten seat belt.
4. Adjust mirrors (this may require assistance.)
5. Adjust the operator control panel.
6. Make sure the travel select lever is set to NEU-
TRAL (N) and the Parking Brake is ON
(engaged).
Xtreme ManUfacturing
46
NOTE: The engine will only start when the travel
select lever is in NEUTRAL (N) and the parking
brake switch is ON (engaged) .
...--.
Figure 7-7. Travel Select Lever Must Be In NEUTRAL (N) To
Start The Reach Forklift.
Figure 7-8. Parking Brake Switch (A) Must Be ON (Engaged)
To Start The Reach Forklift.
800-497-1704