Table of Contents
Advertisement
Operator Cab
Gear Select Switch
The Gear Select switch has a twist grip handle with
four (4) positions: 1 – FIRST, 2 – SECOND, 3 – THIRD, and
4 – FOURTH
NOTE: The reach forklift can be operated in four (4)
forward and four (4) reverse gears
Figure 6-17. Gear Select Switch.
Parking Brake Switch
The Parking Brake switch (A) has two (2) positions: ON
and OFF
Figure 6-18. Parking Brake.
(A) Parking Brake Switch Guard. (B) Parking Brake Indicator.
Set Parking Brake switch (A) to ON (DOWN) to engage the
parking brake and to OFF (UP) to disengage the parking
brake The parking brake indicator (B) illuminates when
the parking brake is set to ON (engaged)
Page 38
Load Capacity Charts
Load capacity charts are located on the left side of the
front control panel Load capacity charts are provided to
assist the operator in determining how to safely handle
loads with the reach forklift, including boom angle, height,
and reach
Figure 6-19. Typical Load Capacity Chart.
Hydraulic Oil Temperature Indicator
The hydraulic oil temperature indicator illuminates when
the oil temperature is above 180°F (82°C)
If the hydraulic oil temperature indicator illuminates,
stop and idle the engine to allow time for cooling If the
hydraulic oil temperature indicator does not go out after
five (5) minutes, stop the forklift, follow proper shut down
procedures, tag the forklift with "Do Not Operate" tags,
and have a qualified mechanic service or repair the forklift
BEFORE placing it into service again
Figure 6-20. Hydraulic Oil Temperature Indicator
XR1045
Xtreme Manufacturing, LLC
Advertisement
Table of Contents
