Password - DeltaOHM HD32.1 Operating Manual

To access the Key lock submenu, proceed as follows:
1. Press SETUP ;
2. Use the arrow keys ▲▼ to select Key lock
3. Press ENTER :
4. You will get the following message: "Enter password"
5. Use the arrow keys ▼▲ to enter the correct password;
6. Press ENTER to confirm (or ESC to cancel);
By pressing ENTER you return to the main menu and the instrument is locked: A "key" is
displayed at the top left of the display;
WARNING! When the instrument is locked by a password, all keys are locked, except MEM , used
to start the LOG session and SETUP, ENTER and ESC that allow entering the main menu to
unlock the instrument.
Therefore the user has to set all required parameters, protect the instrument using the KEY LOCK
function and start the LOG session, in order to prevent any undesired access by unauthorized
personnel.
To unlock the instrument, repeat the steps above: Enter the main menu and unlock the instrument
using the Key lock and entering the password.
If the password is wrong, you will get the message "Wrong password".
5.10 P
ASSWORD
This menu item allows setting a password to protect the instrument from unauthorized access. There
are two types of passwords available, both consisting of four characters :
The default password consists of four zeros: 0000.
• The user password : can be set by the user to protect the instrument from unauthorized access;
• The factory password is reserved to Technical Support.
To access the Password submenu, proceed as follows:
1. Press SETUP ;
2. Use the arrow keys ▲▼ to select Password
3. Press ENTER :
4. The following message will appear:
- 47 -
HD32.1 V2.1