Baud Rate; The Print Interval - DeltaOHM HD32.1 Operating Manual

4. You will get the Serial submenu.

5.3.1 Baud Rate

The Baud Rate indicates the speed used for the serial communication with the PC.
To set the Baud rate, proceed as follows:
1. Use the arrow keys ▲▼ to select the item;
2. Press ENTER : You will get the following message:
3. Use the arrow keys ▼▲ to set the value;
4. Press ENTER to confirm and return to the previous page, or press ESC to cancel the change and
exit the menu item;
5. Press ESC over and over to exit from the submenus;
6. Press SETUP to exit immediately from the main menu.
WARNING: The communication between instrument and PC (or serial port printer) only
works if the instrument and PC baud rates are the same . If the USB connection is used this
parameter value is automatically set.
NOTE: When setting the baud-rate, check the printer speed.

5.3.2 The Print Interval

To set the Print Interval, proceed as follows:
1. Use the arrow keys ▲▼ to select the item;
2. Press ENTER : You will get the following message:
- 43 -
HD32.1 V2.1