Wci Index; Radiation Temperature Tr; The Unit Of Measurement "Unit; The Maximum, Minimum And Average Values Of The Captured Quantities - DeltaOHM HD32.1 Operating Manual

Thermal microclimate

Table of Contents

4.1.3 WCI Index

To display the WCI index, proceed as follows after opening the drop-down menu with SHIFT

FNC :

1. Use the arrow keys ▲▼ to select WCI ;

2. Press ENTER to confirm: the selected quantity is displayed in the central line of the display;

3. Press ESC to exit the drop-down menu without making any change.

To display the radiation temperature Tr, proceed as follows after opening the drop-down menu with

SHIFT FNC :

1. Use the arrow keys ▲▼ to select TRAD ;

2. Press ENTER to confirm: the selected quantity is displayed in the central line of the display;

3. Press ESC to exit the drop-down menu without making any change.

By using the "Functions" menu, you can display the temperature in °C (Celsius), °F (Fahrenheit) or

°K (Kelvin) degrees, as follows:

1. Use SHIFT FNC to open the drop-down menu;

2. Use the arrow keys ▲▼ to select unit;

3. Press ENTER to confirm: the selected quantity is displayed in the central line of the display;

4. The three different temperature units of measurement are shown in the bottom line of the

display, using F1 , F2 or F3 : The unit is selected and displayed near the value shown in the

central line;

5. Press ESC to exit the drop-down menu without making any change.

In order to display the maximum, minimum and average values of the measured quantities, proceed

as follows:

1. Use SHIFT FNC to open the drop-down menu;

2. Use the arrow keys ▲▼ to select data ;

3. Press ENTER to confirm: the selected quantity is displayed in the central line of the display;

4. The three quantities max (maximum), min (minimum) and avg (average) are shown in the

bottom line of the display, using F1 or F2 .

HD32.1

- 29 -

V2.1

Table of Contents