Table of Contents
Advertisement
5. Use the arrow keys ◄► to decrease or increase the contrast;
6. Press ENTER or ESC to return to the main menu;
7. Press SETUP to exit immediately from the main menu.
5.6 F
IRMWARE
This menu item allows changing the instrument's operating program .
To access the Firmware submenu, proceed as follows:
1. Press SETUP ;
2. Use the arrow keys ▲▼ to select Firmware;
3. Press ENTER ;
4. You will get the following display:
5. Use the arrow keys ▲▼ to select the operating program that you want to install;
6. Press ENTER to confirm and wait for the chosen program self-installation;
7. At the end the instrument will reset and get ready for the chosen program.
Note: The operating program must be present in the instrument.
5.7 T
/
IME
DATE
This menu item allows setting the date and time that will be shown at the top of the display.
To access the Time/date submenu, proceed as follows:
1. Press SETUP ;
2. Use the arrow keys ▲▼ to select Time/date
3. Press ENTER :
4. You will get the following message
- 45 -
HD32.1
V2.1
Advertisement
Table of Contents
