Table of Contents
Advertisement
1. press ENTER to erase all files;
2. press ESC to undo and back to the previous menu;
3. press SET to exit the main menu directly.
2) Log time interval
It refers to logging time: when the set time interval expires, logging stops. Press the MEM key to
stop logging before the set time interval expires.
To disable this function, set time at 0. In this case, if you press the MEM key or the memory is full,
logging will stop.
Use the arrow keys to change the set time, the allowed maximum value is 1 hour.
Press ENTER to confirm.
Press ESC to exit this submenu without saving changes.
Press SETUP to exit the main menu directly.
5.3 S
M
(S
C
)
ERIAL
ENU
ERIAL
OMMUNICATION
The Serial submenu allows setting the data transfer speed via serial port (Baud rate) and the record
printing interval (Print Interval).
The LOG sessions can be downloaded on a PC, through serial RS232 or USB connection.
In case of serial connection, the transfer speed can be set by the user (see next par.) but it can not be
higher than 38400 bps.
In case of USB connection, the transfer speed is fixed at 460800 bps.
After downloading the data on the PC, using the dedicated software, they will be processed by this
software for graphic display and the calculation of the comfort/stress indexes.
The instrument can be connected directly to an 80 column serial printer.
To access the Serial submenu, proceed as follows:
1. Press SETUP ;
2. Use the arrow keys ▲▼ to select Serial;
3. Press ENTER ;
- 42 -
HD32.1
V2.1
Advertisement
Table of Contents
