Table of Contents
Advertisement
Press F1 to start the capture procedure:
On the first line, the blinking TU symbol and the start message replaced by running , indicate
that the procedure was started.
After few seconds the TU symbol will disappear, the running message will be replaced by start
and the turbulence intensity value will be displayed.
4.1.2 WBGT Index
To display the WBGT index, proceed as follows after opening the drop-down menu with SHIFT
FNC :
4. Use the arrow keys ▲▼ to select WBGT ;
5. Press ENTER to confirm: The selected quantity is displayed in the central line of the display;
6. Press ESC to exit the drop-down menu without making any change.
Now you can display the Indoor (WI) or Outdoor (WO) values, by selecting them using the F1 or
F3 keys (see figure).
HD32.1
- 28 -
V2.1
Advertisement
Table of Contents
