The Maximum, Minimum And Average Values Of The Captured Quantities - DeltaOHM HD32.1 Operating Manual

Pressing F1 toggles the display between m2 and inch2 ;
• Press enter to confirm the information and exit from the setting section.
• Press ESC to exit the drop-down menu without making any change.

4.3.2 The maximum, minimum and average values of the captured quantities

Proceed as follows to access data function:
• Use SHIFT FNC to open the drop-down menu;
• Use the arrow keys ▲▼ to select data ;
• Press ENTER to confirm: the selected quantity is displayed in the central line of the
display;
• The three quantities max (maximum), min (minimum) and avg (average) are shown in the
bottom line of the display, using F1 or F2 .
The F3 key allows choosing to clear (Clr) the maximum, minimum and average data of the
captured measurements:
• In order to clear the data, select Clr with F3 ;
• Another drop-down menu will open;
• Use the arrow keys ▲▼ to select yes;
• Press ENTER to confirm.
• Press ESC or select no, to exit without clearing the data.
HD32.1
- 34 -
V2.1