Table of Contents
Advertisement
To access the programming menu press SETUP : The setting menu will be displayed with the
following items:
0) Info
5) Firmware
1) Logging
6) Time/date
2) Serial
7) Calibrate
3) Reset
8) Key lock
4) Contr.
9) Password
If you do not press any key within 2 minutes, the instrument goes back to the main display.
Use the arrow keys ▲▼ ◄► and press ENTER to select an item.
To exit the selected item and return to the previous menu, press ESC .
To exit immediately from the main menu, press SETUP again.
5.1 I
M
NFO
ENU
Once you enter the main menu by pressing SETUP , press ▼ and ENTER to access the Info menu,
The following information on the instrument will be displayed: Instrument code and operating
program, firmware date and version, serial number, instrument calibration date, user identification
code.
• Model HD32.1 Prog. A: Microclimate Analysis Operating Program
• Model HD32.1 Prog. B: Discomfort Analysis Operating Program
• Model HD32.1 Prog. C: Physical Quantities Operating Program
To change the USER ID , press ENTER. Using the arrows ◄ ►, select the digit you want to
change and modify it with arrows ▲ ▼. Proceed for all other digits and, at the end, confirm with
the ENTER key. Note: The USER ID can also be changed by software.
Press ESC to return to the main menu. Press SETUP to exit the menu.
HD32.1
5. MAIN MENU
- 35 -
V2.1
Advertisement
Table of Contents
