Table of Contents
Advertisement
3. Use the arrow keys ▼▲ to set the value;
4. Press ENTER to confirm and return to the previous page, or press ESC to cancel the change and
exit the menu item;
5. Press ESC over and over to exit from the submenus;
6. Press SETUP to exit immediately from the main menu.
The print interval can be set from 0 seconds to one hour:
0 s - 15 s - 30 s - 1 min. - 2 min. - 5 min. - 10 min. - 15 min. - 20 min. - 30 min. - 1 hour.
5.4 R
ESET
To enter the Reset submenu in order to carry out a complete reset of the instrument, proceed as
follows:
1. Press SETUP
2. Use the arrow keys ▲▼ to select Reset
3. Press ENTER : You will get the following message
4. Use the arrow keys ▲▼ to select Reset
5. Press ENTER to confirm, or press ESC over and over to exit from the submenus
6. Press SETUP to exit immediately from the main menu.
5.5 C
ONTRAST
This menu item allows increasing or decreasing the contrast on the display:
To access the Contrast submenu, proceed as follows:
1. Press SETUP ;
2. Use the arrow keys ▲▼ to select Contr.
3. Press ENTER :
4. You will get the following message
HD32.1
- 44 -
V2.1
Advertisement
Table of Contents
