1.8.2. SETUP WIZARD Step 1: Selecting an Operational Mode
• If the Router is to be used with a DSL or cable modem and the IP address
assignment for the Ethernet WAN interface is achieved by PPPoE, select
Router with a PPPoE-Based DSL/Cable Connection.
• If the Router is to be used with a DSL or cable modem and the IP address
assignment for the Ethernet WAN interface is achieved by DHCP, select
Router with a DHCP-Based DSL/Cable Connection.
• If the Router is to be used with a DSL or cable modem and the IP address
Fig. 10. Home Page.
Fig. 11. Operational Modes.
27