Configuring The Smcwhsg44-G; Entering The Password - SMC Networks EliteConnect SMCWHSG44-G User Manual

address of the computer to 192.168.2.xxx (the default IP address of the
SMCWHSG44-G is 192.168.2.1) and the subnet mask to 255.255.255.0.) It is
preferred to set the computer to "obtain an IP address automatically" so the
router will give your computer the correct settings automatically.
NOTE: For some versions of Windows, the computer needs to be restarted
for the changes of TCP/IP settings to take effect.

1.8. Configuring the SMCWHSG44-G

The SMCWHSG44-G is DHCP server enabled by default. After the IP
addressing is configured, launch a Web browser on the managing computer.
Then, go to "http://192.168.2.1" to log on to the Wireless Hotspot Gateway
for Web-based management.

1.8.1. Entering the Password

To log onto the Web based management interface, you will be prompted to
enter the password. For first-time configuration, default password is
"smcadmin". And then, click the LOGIN button.
Fig. 9. Entering the Password.
NOTE: It is strongly recommended that the password be changed to another
value for security reasons. On the start page, go to the SYSTEM\Password
Settings page to change the value of the password (see Section 2.3.2 for
more information).
26