Upgrading Firmware By Http; Backing Up And Restoring Configuration Settings By Http - SMC Networks EliteConnect SMCWHSG44-G User Manual

with some Web browsers. If you cannot successfully perform HTTP-based
firmware management operations with your Web browser, try the TFTP-
based way.

2.3.3.1. Upgrading Firmware by HTTP

To upgrade firmware of the SMCWHSG44-G by HTTP:
1. Click Browse and then select a correct firmware .bin file. The firmware
file path will be shown in the Firmware file name text box.
2. Click Upgrade to begin the upgrade process.

2.3.3.2. Backing up and Restoring Configuration Settings by HTTP

To back up configuration of the SMCWHSG44-G by HTTP:
1. Click Back Up.
2. You'll be prompted to open or save the configuration file. Click Save.
3. The configuration file is named by the SMCWHSG44-G _backup.hex. Don't
change the con-figuration file name in the Save As dialog box. Select a
folder in which the configuration file is to be stored. And then, click Save.
NOTE: The procedure may be a little different with different Web browsers.
To restore configuration of the SMCWHSG44-G by HTTP:
1. Click Browse and then select a correct configuration .hex file. You have to
make sure the file name is the correct name "SMCWHSG44-G_Backup".
The configuration file path will be shown in the Configuration file name
text box.
2. Click Restore to upload the configuration file to the wireless Hotspot
gateway.
Fig. 48. Firmware Upgrade by HTTP.
Fig. 49. Firmware Backup by HTTP.
Fig. 50. Configuration Restore by HTTP.
49