SMC Networks EliteConnect SMCWHSG44-G User Manual page 85

and Device Port. In other words, this request is passed through the built-in
NAT server of the Router and routed to the corresponding man-aged LAN
device.
For example, Fig. 111 illustrates a LAN device management scenario based on
the settings values in Fig. 110. AP1 can be managed from the management
server by using a Web browser and a URL "http://61.16.31.110:60001". AP2
can be managed by using a Web browser and a URL
"http://61.16.31.110:60002". AP3 can be managed from the management
server by using an SNMP manager program via IP address 61.16.31.110 and
port 60003. Destination IP addresses and destination ports of management
packets for AP1, AP2, and AP3 are translated to 192.168.168.201:80,
192.168.168.202:80, and 192.168.168.203:161, respectively. (161 is a well
known port for SNMP management.)
Fig. 111. Example for LAN Device Management.
To specify a LAN device to manage:
1. Give a name for this device in the Device Name text box.
2. Type the Virtual Port, Device IP Address, Device Port, and Device MAC
Address for this device.
3. Choose the type of the management protocol (TCP or UDP) from the
Protocol drop-down list.
4. Choose whether the Router communicates with the device wirelessly by
WDS (Wireless) or by Ethernet (Wired) from the Interface drop-down list.
5. Select the corresponding check box next to the Device Name text box.
NOTE: A valid input for the Virtual Port field must be between 60001 and
60100 inclusive.
NOTE: The IP address in a Device IP Address text box and the Router's LAN
IP address must be in the same IP subnet.
NOTE: The Device Name, Device MAC Address, and the Interface fields are
informational. They do not affect the inner workings of LAN device management.
84