Cisco SPA 525G User Manual page 21

Getting Started
Using Phone Hardware and Accessories
STEP 6
STEP 7
NOTE
STEP 8
STEP 9
STEP 10
STEP 11
NOTE
Cisco Small Business IP Phone SPA 525G/SPA 525G2 (SPCP) User Guide
•
Both—Your Cisco SPA 525G2 will use a Bluetooth headset, or operate with
your Bluetooth-enabled mobile phone. (See
With Your Bluetooth-Enabled Mobile Phone" on page 65
information on using the Cisco SPA 525G2 with your mobile phone.)
Your Cisco SPA 525G2 will connect to only one device at a time (either
NOTE
the Bluetooth headset or the Bluetooth-enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA 525G2, the order
of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,
and the device with a higher priority is activated first.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for your headset.
Depending on the network environment (for example, the number of Bluetooth
devices and noise level), your Bluetooth headset may not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the scan.
In the list of found devices, select your headset and press the Select button to edit
the profile.
Scroll to PIN and enter the PIN for your Bluetooth headset.
Scroll to Connect Automatically and press the Right Arrow key to turn to On.
Press Connect. The profile screen displays and a check mark appears next to the
headset if the connection was successful.
Using a Headset with Your IP Phone
Steps to use your headset with the SPA IP Phone may vary. Consult the user
documentation for your headset for more information.
• To use a wired headset, press the Headset button on your phone and dial
the number to place a call, or press the headset button to answer a ringing
call.
• To use a non-Bluetooth wireless headset (such as Jabra or Plantronics), lift
the receiver off hook before speaking or listening through the headset.
• To use a Bluetooth headset, make sure your headset is powered on. Press
the Headset button on your phone (or, if supported, press the Answer
"Using the Cisco SPA 525G2
for more
1
18