Cisco SPA 525G User Manual page 31

Unified communications manager express for the cisco small business ip phone (spcp)

Hide thumbs Also See for SPA 525G:

Table of Contents

Installing Your Phone

Connecting Your Phone to the Computer Network

STEP 1

STEP 2

STEP 3

Cisco Small Business IP Phone SPA 525G/SPA 525G2 (SPCP) User Guide

Determining Your Wireless Router Security Type

If you do not know your wireless router security type, you need to log in to the

router interface to get this information. The steps below are written for a Linksys

router, but procedures for other routers should be similar.

must be connected to your wireless network. Enter the IP address of the wireless

router in the browser toolbar.

If required, enter the user name and password. (By default, Linksys routers

typically use "admin" for the user name and "admin" for the password.)

View the Wireless tab or screen. Note the network name (SSID) and the type of

security (WEP, WPA Personal, or WPA2 Personal).

If your router is using WEP, note the following information:

•

WEP encryption: 64 bit or 128 bit. You need to choose this later.

•

Default transmit key, or TX key: The default key (of the 4) that the router

transmits to authenticate. This value will be 1, 2, 3, or 4.

•

Passphrase and keys: You choose one of two methods to enter the WEP

key. You either directly enter the WEP key, or enter a more simple

passphrase to generate the WEP key.

Table of Contents

Small business spa525g2