Cisco SPA 525G User Manual page 34

Installing Your Phone
Connecting Your Phone to the Computer Network
STEP 1
STEP 2
Cisco Small Business IP Phone SPA 525G/SPA 525G2 (SPCP) User Guide
• Wi-Fi Protected Setup—If your wireless router supports Wi-Fi Protected
Setup, use this method to set up your wireless connection. See
Protected Setup with the SPA525G, page
Using Wi-Fi Protected Setup with the SPA525G
If your router has a WPS button, you can use Wi-Fi Protected
Setup to add a new wireless network profile.
In the Wireless Configuration screen, select
Choose one of the following options:
Push Button Configuration:
a. Press the WPS button on your router.
b. On your phone, with
button. Your phone may reboot before the Wi-Fi connection is working.
PIN Configuration
a. After selecting PIN Configuration on your phone, note the PIN displayed.
b. Connect to your router's web interface using a web browser. Your computer
must be connected to your wireless network. Enter the IP address of the
wireless router in the browser address bar.
c. If required, enter the user name and password. (By default, Linksys routers
typically use "admin" for the user name and "admin" for the password.)
d. View the Wireless tab or screen. Locate the Wireless Protected Setup
configuration menu.
e. Enter the PIN into the field that allows you to setup wireless devices using a
PIN.
Wi-Fi Protected Setup
Push Button Configuration
Using Wi-Fi
31.
.
highlighted, press the Select
2
31