Related Documents - SimCom SIM5320AL User Manual

Input
I leakage
IH
current
Input
I leakage
IL
current
Input
C
IN
capacitance
Note: These parameters are for digital interface pins, such as keypad, GPIO, I
SIM5320AL includes two kinds of voltages: 1.8v and 2.6v. Digital I/O specifications under both conditions are presented
in the above tables.
D. Related Documents
Table 45: Related documents
SN Document name
SIM5320AL_ATC_V1.0
[1]
0
ITU-T Draft
[2]
recommendationV.25ter
[3] GSM 07.07
[4] GSM 07.10
[5] GSM 07.05
[6] GSM 11.14
[7] GSM 11.11
[8] GSM 03.38
[9] GSM 11.10
[10] 3GPP TS 51.010-1
[11] 3GPP TS 34.124
[12] 3GPP TS 34.121
SIM5320AL_User Manual_V1.01
high
- -
low
-1 -
- -
Remark
SIM5320AL_ATC_V1.00
new
Serial asynchronous automatic dialing and control
Digital cellular telecommunications (Phase 2+); AT command set
for GSM Mobile Equipment (ME)
Support GSM 07.10 multiplexing protocol
Digital cellular telecommunications (Phase 2+); Use of Data
Terminal Equipment – Data Circuit terminating Equipment (DTE –
DCE) interface for Short Message Service (SMS) and Cell
Broadcast Service (CBS)
Digital cellular
Specification of the SIM Application Toolkit for the Subscriber
Identity Module – Mobile Equipment (SIM – ME) interface
Digital cellular
Specification of the Subscriber Identity Module – Mobile
Equipment (SIM – ME) interface
Digital cellular telecommunications system (Phase 2+); Alphabets
and language-specific information
Digital cellular telecommunications system (Phase 2) ；
Station (MS) conformance specification ； Part 1: Conformance
specification
Digital cellular telecommunications system (Release 5); Mobile
Station (MS) conformance specification
Electromagnetic Compatibility (EMC) for mobile terminals and
ancillary equipment.
Electromagnetic Compatibility (EMC) for mobile terminals and
ancillary equipment.
Smart Machine Smart Decision
1 -
- -1
7 -
2
telecommunications
telecommunications
62
- 1 uA
- - uA
- 7 pF
C, UART, SPI and DEBUG. The
system (Phase
system (Phase
Mobile
2014-08-20
2+);
2+);