Samsung RRH-2WB Installation Manual page 89

Finishing Heat Shrink Tube of a Sector Antenna
1) Insert an antenna protection plate to antenna port.
2) Place the heat shrink tube on the connection point and shrink the heat shrink
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
tube using a heat gun.
Antenna Protection Plate
Antenna Jumper Cable
(1/2 in. Feeder Line)
Heat Shrink Tube (Jelly Type)
Avoid aiming the heating gun toward the antenna's body as shown in the
figure below.
Antenna Protection Plate
Heat Shrink Tube
(Jelly Type)
3-27