Figure D.8 Measuring The Optical Output And Connecting The Optic Connector - Samsung RRH-2WB Installation Manual

Measuring the Optical Output and Connecting the Optic Connector
1) Check the optical output again using an optic power meter.
2) If the optical output measurement result meets the reference value, clean the connector again and
connect it. If the measurement result does not meet the reference value, discard the cable, replace it
with a new cable, and then clean the new one and connect it to the system.

Figure D.8 Measuring the Optical Output and Connecting the Optic Connector

© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
[LC/PC Plug]
[PT/LC Plug]
[ODC Plug]
[Harting Plug]
[Optic Powermeter]
D-9