CHAPTER 2. Installing System
b) Align the RRH-2WB fixing support (front side) outside of the tower and the RRH-2WB fixing support
(rear side) inside of the tower with each M8 stud bolt and fixing hole, and tighten them with M8 plane
washers, spring washers, and hex. nuts.
2-24
Figure 2.23 Fixing Tower Type RRH-2WB (2)
M8 Hex. Nut
M8 Spring Washer
M8 Plane Washer
RRH-2WB Fixing Support
(Rear Side)
M8 Plane Washer
M8 Spring Washer
M8 Hex. Nut
M8 Stud bolt
Tower Angle
RRH-2WB Fixing Support
(Front Side)
© SAMSUNG Electronics Co., Ltd.