Table of Contents
Advertisement
CHAPTER 2. Installing System
2.3 Unpacking and Transporting
This paragraph describes the work to unpack cabinets and other components and transport
them to the place to be installed. The cabinet is externally packed and cabinet and other
components are individually packed.
The external packing should be unpacked in the outside. If necessary, the packing can
be unpacked after transported into the area near installation place.
Transport the cabinet to the installation place. Beware of the damage of walls, pillars,
and bottom of the passage when transporting the cabinet.
Transport other components with packing and sort by types.
2.3.1 Importing Items
Bring in items, taking care of the followings:
Regarding equipment weight and size, check the path to bring the equipment.
Lay Iron and veneer boards on stairs or doorsills to make the transportation easy.
When bring in equipment, beware of damage or impairment of main entrance, walls,
pillars, and floors of the station. Prepare protection materials and fix them with a high-
strength adhesive.
Carry boards in packing status, and unpack them when installing or mounting.
Vibration Level for Transportation
When carrying the system, fasten the system firmly not to exceed the proper vibration level
from 1 to 500 Hz.
When carrying system, use a lift to prevent accidents. However, if the system should be
carried by people, enough people are required to carry the system.
Before moving the system, check the storage place for the system and remove obstacles in
advance. While moving system, boards and other devices should not be shocked physically
and damaged caused by dust, moisture, and static electricity.
When installing the items imported, system must be installed in a location whose access is
not easy from outside.
2.3.2 Unpacking Items
The procedure to unpack items is as follows:
1) The packing items should be packed until they reach the installation place.
2) The items are classified in accordance with each job specification and stored on a
place that does not interfere with working.
3) Unpacked systems should be installed immediately. If not installed immediately, the
systems should be stored in the installation place temporarily.
4) Unpack only external packing, leaving the internal packing in unpacked status.
5) Unpack the inner packaging after each system is placed on its installation location.
6) Do not recycle packaging waste. Dispose of it in consultation with the provider.
2-4
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
