Table of Contents
Advertisement
ANNEX E.
Assembly
Method that assembles the pressure terminal by using the crimp-type compressor is as
follows:
[Hydraulic Pressure
Terminal Compressor]
1) Select the appropriate compressor and dies for the cable specification and pressure type.
2) Attach the cable and dies satisfying the pressure
terminal specification to the lower section of the
compressor terminal.
© SAMSUNG Electronics Co., Ltd.
Pressure Terminal
Figure E.1 Pressure Terminal Assembly (1)
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual
[Ring Type Dies]
[Hex. Type Dies]
3) Attach the cable and dies satisfying the pressure
terminal specification to the upper section of the
compressor terminal.
E-1
Advertisement
Table of Contents
