California Usa Only - Samsung RRH-2WB Installation Manual

Finishing Heat Shrink Tube of a Sector Antenna
1) Insert an antenna protection plate to antenna port.
2) Place the heat shrink tube on the connection point and shrink the heat shrink
Installing the Antenna
When you install the antenna, the distant and angle between the antenna and
lightning rod must be within the protective angle (left/right side 45° each from the
central axis) to prevent the antenna from lightning damage.

California USA Only

This Perchlorate warning applies only to primary CR (Manganese Dioxide)
Lithium coin cells in the product sold or distributed ONLY in California USA
'Perchlorate Material-special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate.'
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
tube using a heat gun. Avoid aiming the heating gun toward the antenna's body.
IX