Table of Contents
Advertisement
ANNEX B. Installing Feeder Cable
7) Align the 42 mm (1.65 in.) heat shrink tube [jelly type, 200 mm (7.87 in.)] inserted when installing the
feeder line into the fixing part of the ground kit.
8) Shrink the heat shrink tube[jelly type, 200 mm (7.87 in.)] by heating gun.
7
B-6
Heat Shrink Tube
42 mm (1.65 in.)
8
Figure B.3 Feeder Cable Grounding (3)
Heat Shrink Tube
42 mm (1.65 in.)
200 mm
(7.87 in.)
Heating Gun
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
