Husqvarna 536LiHE3 Workshop Manual page 56

Troubleshooting - annex
12 Troubleshooting - Annex
1. Current contacts
Make sure the contacts are clean and that none of
the metal surfaces are damaged. Take extra care in
checking the connection tabs. The current contacts
have the same basic design for product, battery
and charger. It is only the colors that can differ.
1. Power connectors
Make sure connectors are free from dirt and that
metal surfaces are not damaged.
Pay certain attention to the connection tabs. Power
connectors have the same basic design on prod-
uct, battery and charger. Only colors may vary.
2. Keypad connector
Make sure cabling is not damaged.
2. New generation keypad connector
Make sure the that there are no broken or dam-
aged cables.
English – 56