Husqvarna 536LiHE3 Workshop Manual page 35

Repair Instructions
4
Work the cabling, one wire at a time, through the
angle joint.
NB! Exercise care so that the cabling is not
damaged.
Assemble the lower angle joint cover.
5
Assemble the screw holding the locking pin for the
angular adjustment of the cutting unit.
6
Assemble the screws holding the upper angle joint
cover, 5 pcs.
7
Refers to cabling side.
Take care not to damage the cabling.
Assemble the bushing (2).
Assemble the clamp (1).
35 – English
2
1